+6012-9029878Free Shipping above Rm300 n4camerastore@n42u.com.my
Search
The NT6 is a small-diaphragm cardioid condenser microphone with a remote capsule, specifically designed for difficult mounting applications where the highest quality audio is required.
The microphone is split into two modular components that are connected via a custom 3-metre shielded, Kevlar-reinforced cable. The head features a 1/2-inch gold-sputtered condenser capsule with a multi-position mounting ring that provides 180 degrees of vertical rotation. The body houses the microphone preamp, which features a high-pass filter (80Hz) and a -10dB pad.
Key Features:
- Premium small-diaphragm condenser microphone with remote capsule
- 1/2-inch gold sputtered
- Two-stage pad, two-stage high-pass filter
- Ideal for difficult mounting applications
Specifications:
Acoustic Principle: Pressure Gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 0.50"
Polar Pattern: Cardioid
Address Type: End
Frequency Range: 40Hz - 20kHz
Output Impedance: 200Ω
Maximum SPL: 135dB SPL
Maximum Output Level: 6.0mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity: -37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise: 19dBA
Power Requirements: P24 and P48
Output Connection: XLR
Dimensions (mm)
189 (H) x 64 (W) x 20 (D)
The NT6 is a small-diaphragm cardioid condenser microphone with a remote capsule, specifically designed for difficult mounting applications where the highest quality audio is required.
The microphone is split into two modular components that are connected via a custom 3-metre shielded, Kevlar-reinforced cable. The head features a 1/2-inch gold-sputtered condenser capsule with a multi-position mounting ring that provides 180 degrees of vertical rotation. The body houses the microphone preamp, which features a high-pass filter (80Hz) and a -10dB pad.
Key Features:
- Premium small-diaphragm condenser microphone with remote capsule
- 1/2-inch gold sputtered
- Two-stage pad, two-stage high-pass filter
- Ideal for difficult mounting applications
Specifications:
Acoustic Principle: Pressure Gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 0.50"
Polar Pattern: Cardioid
Address Type: End
Frequency Range: 40Hz - 20kHz
Output Impedance: 200Ω
Maximum SPL: 135dB SPL
Maximum Output Level: 6.0mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity: -37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise: 19dBA
Power Requirements: P24 and P48
Output Connection: XLR
Dimensions (mm)
189 (H) x 64 (W) x 20 (D)
